Pre-finished, self-flashing. 16 gauge galvanized steel verticals. Door covering slides into channel of vertical for a clean, smooth fit. No flashing needed - vertical provides a clean, finished edge. Available in 7 to 17 ft. in one-foot increments.
6025 Boxed Hardware
For TAB-LOC* doors includes: (3)- #6005 guide rail brackets; (3) - 3/8" bolts, nuts, washers to attach #6004 guide rail to brackets; (6)- 5/16" x 2 1/4" carriage bolts, nuts, washers to attach brackets to building; plus directions.
6026 Boxed Hardware
For TAB-LOC* doors includes: (5) - #6005 guide rail brackets; (5) - 3/8" bolts, nuts, washers to attach #6004 guide rail to brackets; (10) - 5/16" x 2 1/4" carriage bolts, nuts, washers to attach brackets to building; plus directions.
6003 TAB-LOC* Stiffener Strip
12' length used to strengthen 14' and above #6021 TAB-LOC* Verticals when used in high wind areas. Flat strip slides into vertical before laterals are installed.
The galvanized 16 gauge laterals are pre-punched at each end for eassy attaching to vertical members. All laterals have hanger holes pre-punched and can be used as either top, bottom or intermediate door members. Available in 4 to 20 ft sections.
1253 Center Door Latch
Cam action, adjustable hook holds bi-parting doors tight. For TAB-LOC* or EASY-FRAME* doors 1 1/2" or thicker.
1262/1263 Jamb Latches
Cam action and adjustable hook holds door firmly against the jamb. 1262 has 7 in. hook; 1263 has 4 in hook.
6000T TAB-LOC* Assembly Tool
This tool is helpful in bending the special locking tabs into slots on frame.
