Sliding Door Accessories
Latches
|
600 Jamb Latch The 7" Jamb latch/snugger is used on the inside of jamb to secure sliding doors, and can be used for either right or left hand applications. The strike plate is lumber-fit for easy installation. |
|
610 Center Door Latch
Easily and tightly secures bi-parting doors with cam-action latch. A strong bolt hooks at one end to fit strike plate; opposite end is threaded to allow adjustment of latch tension. For wood doors 1-1/2" or thicker. |
|
620 Sliding Latch Reversible, use right or left hand operation. Sturdy 1/2" x 8" solid steel bolt. Zinc plated. Add padlock by placing heavy staple or hasp in slotted handle. Includes fasteners. |
|
630 Sliding Bolt Latch
Ideal for livestock/horse barns, this heavy duty 1/2" x 10" steel bolt doubles as a handle/pull, and may be latched at left or right. Latch bar is secured with two sets of guides and backplates, providing a snug fit with smooth operation. Hardware has rounded edges. Mounting screws included; installation guide illustration is on package label. |
Stay Rollers
|
585 Stay Roller Wall mounted. Adjustable for doors 1-1/4" to 3-5/8" thick. Reversible, 2" non-marking plastic wheel. Frame is 3/16" zinc plated steel, 1-1/4" wide x 4-1/4" long. |
|
780 Stay Roller Wall mounted with 2" diameter non-marking plastic wheel. Adjustable and reversible for doors 1-1/2" to 2-1/2" thick. Frame is 1/8" thick, 3-1/2" wide, 4" long and zinc plated. |
|
800 Stay Roller This heavy duty stay roller is fabricated from 3/16" zinc plated steel, and adjusts from 1" to 3-3/4" for a wide range of door widths. Non-marking plastic wheel mounted on sturdy 1/2" bolt. Offset slots allow full contact with door. |
Door Pulls
|
50-3 Door Pull
This door pull is 1-1/4" wide and has a 6-5/8" overall length. Retains 1-3/4" deep clearance to allow use with gloved hand. Order 50-3 for zinc plated finish, 50-3W for white powder coated. 50-3B for black powder coated. |
|
50-5 Door Pull Extra heavy construction for use with heavy doors. With a 7-7/8" over-all length, 2" wide, 7/16" holes. Formed 1-3/4" deep to allow easy use, even with gloved hand. Order 50-5 for zinc plated finish or 50-5W for white powder coated finish. |
Door Binders/Stops
|
537 Single Binder/Stop Offset is 2" x 3-1/4". Overall length is 7" and is fabricated from 3/16" x 1-1/2" zinc plated steel. Holes accept 3/8" bolts or lag screws (not included). |
|
540 Door Binder/Stop For 2" doors, made from rugged zinc-plated steel and ribbed to increase strength. Holes accept 5/16" bolts or lag screws (not included). |
|
545 Adjustable Door Guide/Stop Idea for corrugated metal-clad doors, this adjustable guide may be expanded in width for doors from 2-1/2" to 6" thick. Curved surface gives natural lead-in. The door guide also mounts sidewise for use as a stop. Easy to install, available in powder-coated white finish only. |
|
550 Adjustable Door/Binder Stop Heavy duty, adjustable for single side or bi-parting doors. Widths 2-1/2" to 3-1/8" thick. |
|
560 Jamb Mount Door Stop 2-1/2" x 8-1/2" galvanized steel unit extends from jamb to stop and hold doors in open or closed position. |
Miscellaneous
|
528 Stake Holder Ideal for vertical post applications. This design prevents tapered 2 x 4 from sliding through holder. Heavy duty steel construction. (1-3/4" x 3") |
|
624 Cane Bolt Heavy duty deluxe cane bolt has zinc plated 5/8" diameter rod, 24" in length. Fancy mounting brackets and screws included. |
|
900 Chain Snugger Ring and hook simply secure a chain to desired length for holding bi-parting sliding door leaves together. Designed for use with clad wood-frame doors, rods mount on opposite sides of joining door verticals, angling upward from horizontal door spacers toward the inside of verticals where the doors meet. The chain will then drop to lowest position for a snug fit. |