Crash Guard Safety Rails
Improve plant safety and efficiency with Crash Guard Safety Rails by reducing the costs associated with
employee injury, machinery down time, insurance claims, and building repairs due to accidental collisions.
- Formed 10 gauge steel rails made in lengths up to 12'
- Rails can withstand impacts of 10,000 pounds traveling at 4 miles per hour
- Structural steel posts have open sides for easy assembly
- Base plates are 10" square x 5/8" thick steel
- Fasteners are included
- Rounded top rails will prevent injuries and provide added personnel protection
Crash Guard safety rails install in minutes with ordinary hand tools and concrete drill. Safety rail systems protect personnel, machinery, building structures, in-plant offices, aisle ways, electrical panels, tool cribs, conveyors, finished products, receiving docks, cooling equipment, and parking areas.
Rail Length Chart & Architectural Specifications
|Rail Cross Section
|Single, Double or Triple Tier||Safety Rails: 10ga. formed steel |
Base: 5/8" steel plate
Columns: Structural steel beam
1/2" Assembly Hardware provided
Safety Rail sections shall be constructed of formed 10 gauge ATSM A36 steel welded to 1/4" steel end plates. Rail beam cross-section shall be 12" high and 2 5/8" in depth. Rails will be provided to lengths of no greater than 12' with rail lengths based upon center-of-post to center-of-post measurements in 1' increments. Rails will be delivered with 1/2" mounting hardware.
Mounting posts shall be constructed of W4x13 ASTM A36 structural steel I-beams, with .280" web thickness and .345" flange thickness, welded to 10" x 10" x 5/8" ASTM A36 steel base plates and 4" x 4" x 1/4" ASTM A36 steel caps. Post I-beam cross-section shall be a minimum of 4.06" wide and 4.16" high. Standard post heights are 18" and 42" and include 4 each 5/8" wedge anchors for concrete mounting.
All surfaces to be painted safety yellow. All components are to be installed in accordance with supplied manufacturer's specifications.
Safety Rail systems protect personnel, machinery, and building structures. They can be utilized in many other situations as well. They will improve plant safety and efficiency by reducing cost associated with employee injury, machinery down time, insurance claims, and building repairs due to accidental collisions. All measurements are center-to center of posts. Rails are 10 gauge formed steel with 5/8" steel plate base. Columns are structural steel beam. For special length rails, use next longer length for cost. Powder-Coated Safety Yellow. 5/8" Wedge Anchors and 1/2" Assembly Hardware provided.
Back to Safety Equipment