Loading Dock Guide Lights
The Loading Dock Guide Light provides added safety at industrial docks by improving a driver's depth perception when backing into an open dock mouth. It provides an ideal focal point for drivers and greatly reduces the risk of "overrunning" a dock. Dock Guide Lights can vastly reduce damage and injuries due to trucks backing in too far or too quickly. The Dock Guide Light is constructed of high impact polycarbonate with ribbed reinforcing. The Dock Guide Light operates on 12 volts AC/DC and can be controlled with the Control Console or any other independent source of low voltage via transformer.

Dock Guide Light
The Model DGL Dock Guide Light provides a visual target to align the trailer with the door. The DGL Dock Guide Light is especially useful when the loading dock is within an enclosed loading bay where the lighting level is low. The Model DGL light fixtures may also be installed inside the building to mark the door openings for fork truck operators. They can be used with a DM-2 controller (below) or powered from a separate 12 VAC supply.
DGL-101(DM-2 Controller + Four DGL Guides)
Guidance and control for two dock bays.

Comprizes:
  • Model DM2 Control Box
  • 2 pair Model DGL Dock Guide Lights
DGL-202 (DM-2 Controller + Two DGL Guides)
Guidance and control for one dock bay.

Comprizes:
  • Model DM2 Control Box
  • 1 pair Model DGL Dock Guide Lights
DM-2 Control Box and Power Supply
for up to 4 DGL units
Interior use only.
Dock Guide Light Product Information Sheet