Loading Dock Equipment - Horse Stalls

Our Horse Stalls are not only attractive, but tough as nails with maximum ease of assembly. The "Flexi-Stall" is engineered to provide the ultimate in design, flexibility and safety for your horses.
The versatility of our "Flexi-Stall" allows you to mix and match components to customize your stall to fit your specific needs. Safety has also been engineered into every stall, with no exposed edges for horses to chew, no hardware or sharp edges to rub against and no protruding objects to step on.

We then finish each component with an attractive black powder coating to accent the beauty of your stalls.

Door and Wall Systems

Assembly Drawing
Components are available in black, powder-coat finish, only.

Stall Kits may be used in a wide range of fabricating techniques. Shown above is just one example of how to build a front wall. (Measurements may be calculated in the field.)

Horse Stall Kit, Accessories

Front Wall System
Door dimensions are 48" wide, 86" high. Overhead clearance must be at least 94 1/2" to accommodate the door, trolley, and track.

10' Front (#80010)

12' Front (#80012)

System comes complete with the following:
(2) Grille Sections
10' front includes (1) 24" (80240) and (1) 48" (80480)
12' front includes (2) 48" (80480)
(2) End channels (80045)
(4) Header Channels (80006)
(1) Wall Brace (84545)

Additional wood materials required for a 10' front wall:
(8) 2" x 6" x 6'
(1) 2" x 12" x 10' track board.

Additional wood materials required for a 12' front wall:
(9) 2" x 6" x 8'
(1) 2" x 12" x 12' track board.

Side Wall System

10' Partition (#81048)

12' Partition (#81248)

System comes complete with the following:
(3) Grille sections
10' front wall includes (2) 48" (80480) and (1) 24" (80240)
12' front includes (3) 48" (80480)
(2) End channels (80045)
(2) Header Channels (80006)
(1) Wall Brace (84545)

Additional wood materials required for a 10' wall:
(11) 2" x 6" x 10' for 10'

Additional wood materials required for a 12' wall:
(11) 2" x 6" x 12' for 12'

Partition or Rear Wall System (80445)

10' or 12' Section (#80445)

System comes complete with the following:
(4) End channels (80045)
(2) Wall Braces (84545)

Additional wood materials required:
(17) 2" x 6" equal to desired wall length